Security window film vs. riot glass is the comparison that St. Louis business owners in the central business district, Cherokee Street, the Delmar Loop, and suburban retail corridors are making more frequently, as smash-and-grab attacks and after-hours forced-entry attempts have become a documented, recurring problem across the metro. The two products are frequently confused, misrepresented, and mis-specified by installers who only carry one of them. Understanding the difference between security window film and riot glass is not a technical exercise. It is a practical business decision that determines whether your storefront glass holds up for thirty seconds or thirty minutes when someone decides to come through it. Dalo Tint installs both products for St. Louis businesses, and this guide explains exactly what each one does, what it does not do, and which one your business actually needs.
Dalo Tint serves commercial storefronts, retail operators, financial institutions, and high-value inventory businesses throughout St. Louis and surrounding areas, including Clayton, University City, Maplewood, Kirkwood, Chesterfield, and the south city retail corridors.
The Short Answer: Two Different Products Solving Two Different Problems
Security window film is a laminate applied to existing glass that holds broken fragments together when the glass is struck. It does not prevent the glass from breaking. It prevents the glass from clearing, which is the difference between a window that a smash-and-grab attacker can reach through in five seconds and one that takes two to four minutes of sustained effort to break through. That delay is often enough to cause the attack to be abandoned.
Riot glass is a structural glazing product, either a polycarbonate or laminated composite panel, installed in front of or in place of existing glass. It does not hold broken glass together because it does not break in the first place under most attack conditions. Under repeated strikes with sledgehammers, crowbars, and heavy blunt instruments, riot glass absorbs and distributes the impact energy and maintains its barrier function for significantly longer than any film product applied to standard glass.
The simplest way to think about it is that security film is a delay product against opportunistic attacks. Riot glass is a resistance product designed to withstand sustained, determined forced-entry attempts. Most St. Louis storefronts need one or the other based on their specific threat profile. Some need both.
What Security Window Film Is and How It Works
Security window film is a thick polyester or multi-layer composite film applied to the interior surface of existing storefront glass. The film bonds to the glass using a strong pressure-sensitive adhesive. When the glass is struck and breaks, the film holds the shattered pieces bonded together rather than allowing them to scatter or fall out of the frame.
An attachment system that mechanically bonds the film-and-glass assembly to the window frame significantly improves performance. Without an attachment system, a broken but filmed window can still be pushed through the frame intact. With an attachment system, the glass, film, and frame resist as a single bonded unit. Dalo Tint evaluates whether an attachment system is appropriate for each opening during the site assessment and includes it in the specification for storefronts where the threat profile warrants it.
What Security Film Will and Won’t Stop
Security film will stop or significantly delay an opportunistic smash-and-grab attacker who expects to break the glass quickly and reach through to grab product or cash. Most smash-and-grab attempts against filmed and anchored glass are abandoned within two to three minutes because the glass does not clear as expected, and the risk of continued exposure increases.
Security film will not stop a sustained, determined attack with heavy tools over an extended period. It will not stop a vehicle ram. It will not protect against ballistic threats. It is a delayed product, and it should be specified and communicated to business owners as exactly that.
Cost Range for St. Louis Storefronts
Security film for a standard St. Louis retail storefront, covering the primary entry glass and adjacent panels, typically runs at a per-square-foot installed cost that is a fraction of installing riot glass or full glazing. The exact cost depends on the total glass area, the film specification, and whether an attachment system is included. Dalo Tint provides written quotes for every St. Louis storefront project following a site assessment.
What Riot Glass Is and How It Works

Riot glass is a structural panel product, not a film. The most common riot-glass materials are polycarbonate, a tough, transparent plastic that flexes and absorbs impact rather than fracturing, and laminated glass composites, which combine glass layers with interlayers engineered to hold the layers together and resist penetration under sustained attack. Some configurations combine both materials for higher performance.
When riot glass is struck with a blunt instrument, the energy of the strike is absorbed and distributed across the panel surface rather than concentrating at a single fracture point. The panel may deform or show surface damage, but it does not clear and does not allow penetration for significantly longer than a standard glass film under the same attack. Riot glass solutions for St. Louis businesses from Dalo Tint are specified based on the threat level and frame configuration of each specific opening.
Forced-Entry Ratings Explained
Riot glass products are rated for forced-entry delay under standardized testing protocols that simulate sustained attack with specific tools at specific force levels. The ratings express how long the panel resists penetration under those conditions. Higher-rated configurations provide longer delay times and are appropriate for higher-threat applications. Dalo Tint specifies riot glass with delay ratings matched to the threat profile of each installation rather than applying a single specification to every opening.
Retrofit Attachment Systems vs. Full Glazing Replacement
Riot glass can be installed in two ways. Full glazing replacement removes the existing glass and installs a riot glass panel in the frame, which is the highest-performance option but requires a glazier, frame preparation, and a longer installation time and higher cost. A retrofit attachment, which installs a riot glass panel in front of the existing glass within the existing frame, is a less disruptive and lower-cost approach that delivers meaningful performance improvements for most St. Louis storefront applications. Dalo Tint evaluates frame construction and the condition of existing glass during the site assessment to determine the appropriate installation approach for each opening.
Side-by-Side Comparison
Protection Level
Security film delays opportunistic smash-and-grab attacks by holding broken glass together and preventing quick clearing. Under sustained attack with heavy tools, it can eventually be defeated. Riot glass resists sustained forced-entry attempts for significantly longer and does not break under most hand-tool attack conditions. For storefronts where the threat is opportunistic and time-constrained, security film is sufficient. For storefronts where the threat is determined and sustained, riot glass is the appropriate specification.
Cost
Security film is less expensive than riot glass on a per-square-foot installed basis. The cost difference reflects the difference in materials and installation complexity. For St. Louis business owners evaluating both options against a fixed security budget, security film covers more glass area for the same investment. It is the appropriate starting point for most general retail applications. Riot glass is a higher investment per opening and is appropriate for the highest-priority and highest-threat openings in the building.
Installation Time and Disruption
Security film installation on a standard St. Louis storefront is typically completed in one to two days without closing the business. Riot glass retrofit installation on individual openings typically runs two to four hours per opening and can be phased around business hours. Full glazing replacement with riot glass involves more preparation and installation time and may require temporary closure of specific entry points during the work.
Aesthetic and Daylight Impact
Optically clear security film and clear riot glass panels both maintain the storefront’s visual appearance without tinting or obscuring the glass. Neither product significantly changes the storefront’s exterior appearance from the street. Some riot glass materials have a slightly different optical character from standard float glass, which may be visible on close inspection. Still, at normal street-viewing distances, both products are visually acceptable for retail and commercial storefront applications.
Which Solution Is Right for Your St. Louis Business?

Boutiques, Salons, and General Retail
Most boutiques, salons, and general retail operators on Cherokee Street, the Delmar Loop, Maplewood’s Manchester Avenue, and in suburban St. Louis shopping centers face an opportunistic smash-and-grab threat profile. Security film with an attachment system is the appropriate specification for these businesses. It addresses the primary threat, fits within a retail security budget, and can be installed without business closure.
Dispensaries, Jewelers, and High-Value Inventory
Cannabis dispensaries, jewelry stores, and any St. Louis retailer with concentrated high-value inventory that is visible and accessible from the storefront are targets for more determined and sustained forced-entry attempts. These businesses benefit from riot glass on primary entry points and display counter glazing, with security film as a baseline layer on secondary and perimeter glass. The value of the inventory behind them justifies the investment in riot glass at the highest-threat openings.
Banks, Pharmacies, and Critical Infrastructure
Financial institutions and pharmacies in St. Louis face the highest level of forced-entry threat among commercial categories in the metro. After-hours ATM vestibule attacks and pharmacy controlled-substance smash-and-grabs are documented patterns in the St. Louis market. Riot glass on ATM vestibule glazing, pharmacy counter enclosures, and primary entry points is the appropriate specification for these applications. Security film on the perimeter and secondary glass rounds out the protection profile. Commercial window film services cover the full range of security glazing options Dalo Tint provides for St. Louis commercial properties across all risk categories.
When to Combine Both
The most comprehensive forced-entry protection strategy for a St. Louis high-risk storefront combines riot glass on the primary entry points and highest-threat openings with security film on secondary glass, perimeter windows, and any opening where riot glass is not cost-justified by the threat level. This tiered approach concentrates the higher investment where the threat is highest and provides a meaningful delay layer across the entire glass perimeter, resulting in a lower total project cost than specifying riot glass on every opening.
Dalo Tint designs tiered security glazing specifications for St. Louis storefronts, matching the right product to each opening based on the assessed threat level, the frame configuration, and the business owner’s security budget. The result is a protection profile that is more effective than security film alone and more cost-efficient than riot glass everywhere.
Working With a St. Louis Installer Who Offers Both
The practical problem with most security glazing conversations in the St. Louis market is that many installers only carry one product. An installer who only does security film will tell you that security film is sufficient for every application. An installer who primarily does glazing replacement will lean toward riot glass for every application. Neither position serves a St. Louis business owner who needs an honest assessment of which product fits which opening.
Dalo Tint installs both security film and riot glass for St. Louis commercial properties and specifies each based on the actual threat profile and budget of each specific project. Every engagement starts with a site assessment that evaluates the openings, the threat level, the frame construction, and the business owner’s security objectives before a product recommendation is made.
Contact Dalo Tint today to schedule a security glazing assessment for your St. Louis storefront and get an honest specification that matches the right product to the right opening across your building.
Frequently Asked Questions
Will security film stop a brick or hammer attack on my St. Louis storefront?
Security film will not prevent the glass from breaking when struck with a brick or hammer. What it does is hold the broken glass together so the opening does not clear on the first strike. An attacker who expects to break the glass and reach through immediately instead faces a surface that requires repeated sustained effort to create an opening. For most opportunistic smash-and-grab attacks against St. Louis retail storefronts, that delay is enough to cause the attempt to be abandoned. For sustained attacks with heavy tools over an extended period, security film with an attachment system significantly delays entry but can eventually be defeated. Riot glass is the appropriate specification for storefronts that face that level of sustained threat.
Is riot glass actually bulletproof?
No. Riot glass is designed and rated for forced-entry delay against hand-tool attacks, which is a different and more common threat category than ballistic attacks. Some riot glass configurations provide ballistic resistance, but this is a separate, more demanding specification that must be selected and rated for the relevant ammunition type. For St. Louis businesses where ballistic threat is the documented concern, a specifically ballistic-rated glazing product is the correct specification, and Dalo Tint can advise on appropriate options. For the vast majority of St. Louis retail, financial, and pharmacy applications in which the threat is forced entry using hand tools, standard riot glass is the appropriate product.
How much does it cost to retrofit security film vs. replacing glass with riot glass?
Security film installation for a St. Louis storefront is consistently less expensive per square foot than riot glass because the materials are less costly and the installation is less complex. Riot glass retrofit installation, which places a panel in front of the existing glass rather than replacing it, is more expensive than security film but less expensive than full glazing replacement. The appropriate cost comparison for any St. Louis business is not film versus riot glass in the abstract, but rather which product is appropriate for a specific opening and what the total project cost looks like given the building’s threat profile. Dalo Tint provides itemized quotes by following a site assessment, so business owners can make informed decisions about how to allocate their security budget.
Does my insurance carrier give a credit for security film installation in Missouri?
Some Missouri commercial property and liability insurers consider documented security glazing improvements when evaluating coverage terms and premium calculations for commercial storefronts. Whether a specific carrier provides a premium adjustment depends on the carrier, the policy type, and the specific coverage lines involved. Security film does not qualify for the same wind-resistant construction credits as certified impact windows. Still, documented forced-entry protection measures are considered by some underwriters when evaluating commercial property and theft coverage. Dalo Tint provides installation documentation that Missouri business owners can submit to their insurance carrier for review, and recommends discussing the credit question with your broker before and after installation.
Can security film be applied to laminated or tempered glass that’s already in my storefront?
Yes. Security film can be applied to both tempered and laminated glass. Tempered glass, the most common storefront glass type in St. Louis retail construction, is a straightforward security-film substrate. Laminated glass, which already has an interlayer that provides some fragment retention, can also be enhanced with security film for additional performance. The film specification and attachment system approach may differ based on whether the existing glass is tempered or laminated, which is one reason a site assessment that identifies the existing glass type before specifying the film product is an important step in any St. Louis commercial security film project.

CEO
Eddie Schultz is CEO of Dalo Glass Tinting, the St. Louis window film company that joined the EDH Film Group family in 2024. He got his start as a teenager installing film for his family’s business, later built a career in sales, and founded EDH Film Group. Eddie writes about window film for St. Louis homes and businesses, with a focus on honoring the standards Dalo has upheld since 1985.


